PLASTEC PLA15SS6 Blower 5" - Baldor Motor - Hazardous Location - 110/220V-1/4HP

Description

This is a
Plastec
PLA15SS6P
Blower 5", Direct Drive, 115/230 V, 1/4 HP
Model:
PLA15SS6P
SKU::
587547
Retail Price: US ,796
These fans were purchased for a R&D project that never
made it past the initial testing phase . Some have a hard rubber coupling collar installed on the intake that can be removed with a standard Phillips driver. These have a 3/8" threaded drain hole on the bottom of the plastic housing. A plastic plug or other fitting can be used to drain condensation. There are a couple small marks here and there on the motor, but thats just from moving them around the shop.
Corrosion-Resistant Direct-Drive Utility Blower, Fully-assembled
Wheel Dia 5.9 In
43 dBA @ 5 Feet
Max Inlet Temp 140 Deg F
Voltage 115/230, 50/60 Hz,
1 Phase
Full Load Amps 5.6/2.8
Motor HP 1/4
Height 16.13 In
Width 14.16 In
Depth 17.04 In
Inlet Dia 4.92 In
Outlet Dia 4.92 In
Ball bearings Rotation: CCW
Housing Material Polypropylene
Seamless housing prevents leakage of corrosive air fumes
Molded impeller hub and hub cap protect motor shaft, extending product life
Color coding simplifies blower identification
Motors are UL Listed and CSA Certified
Polypropylene models are UV treated and resist most chemicals; polypropylene wheel
Use to exhaust corrosive air fumes in textile, petrochemical, and water/wastewater treatment; metallurgical, pharmaceutical, and food processing; commercial washing services; schools, hospitals, research centers, and laboratories; and marine environments.
Hazardous location rated Class 1 & Class 2
FAST & FREE SHIPPING!
I make a mini pallet for these out of plywood and 2x4s and bolt the blowers to that with hex bolts and pack them in a double thick
cardboard
box covered in Gorilla packing tape.
Check out my
100% POSITIVE
feedback
and
bid with confidence!