12V Car 2-Antenna Vehicle GPS BDS Signal Interference Shield Track Interceptor

Description

12V Car 2-Antenna Vehicle GPS BDS Signal Interference Shield Track Interceptor
Desciption:
1. Vehicle DC 12V fuse protection circuit.
2. It can interfere with all current GPS satellite positioning signals, effectively preventing GPS satellite positioning and tracking.
3. Small size, high power, light weight, large coverage and easy to carry.
4. Work will not affect the normal use of mobile phones or other electronic devices.
5. Applicable to all vehicles equipped with GPS equipment.
The rated operating voltage of this product is 12V - 24V.
with an operating frequency bandwidth of 20 MHz.
Frequency range is: 1560-1580MHz.
Product Dimensions:10*5*3CM
Product weight:50g.
Product Features：
1. Shield the GPS band
2、Total transmitting power 0.8W
3、Effective shielding distance 1-15 meters (debug according to customer requirements before leaving the factory)
4、Convenient to carry, small in size, light in weight, and easy to use.
5、Low power consumption, no harm to human body and environmental protection.
6、Effectively prevent being tracked by GPS BDS satellite positioning, protect your whereabouts privacy and confidential information.
7、Small size, high power, light weight, wide coverage, easy to carry.
8、Effectively prevent car/cell phone GPS satellite positioning system positioning, tracking.
Instructions for use：
1. Remove the GPS unit and install the antenna.
Plug in the corresponding cigarette lighter port of the car. 3.
When the device is powered on, the indicator light is on and the device works normally. 4.
4. remove this car charger directly when finished using it.
Tip：
The following points should be kept in mind when using a car charger.
1、The antenna is intact.
Is the interface between the antenna and the instrument tightened?
3. Whether the inserted instrument has good contact with the vehicle's cigarette lighter port.
Package included:
1*Car GPS reverse positioner